Vol LXIII • No. 1/2011
Analysis of the Cracks in the Chassis and Elastic-Plastic Behavior of the Structure for Cranes
Laurenţiu Sârbu
Loading State in the Leaning Zone of the Cylindrical - Vertical Boilers on Rigid Foundations. Theoretical Study
Radu I. Iatan*, Carmen T. Popa **
Digital Image Correlation Investigations on the Interface Failure of a Sandwich Composite
Matei Constantin Miron, Dan Mihai Constantinescu
Strain Localization During Crack Propagation at the Interface of Dissimilar Materials
Matei Constantin Miron, Dan Mihai Constantinescu
Assessing the Impact of Lamination-Like Flaws on the Operating Safety of Natural Gas Transmission Pipelines
Gheorghe Zecheru*, Gheorghe Drăghici*, Ilie E. Laţa**
Some Aspects Regarding the Evaluation of the Residual Lifetime of Some Pipes Used in the Petrochemical Installations. IV. Case Study
Radu I. Iatan*, Ionel C. Popescu**, Carmen T. Popa***
Fatigue Tests on High Density Polyethylene PE 100 Using Cracked Round Bar Specimens
Vlad Ulmanu*, Gheorghe Draghici*, Virgil Aluchi**
Reliability Model for Describing the Knowledge on the Failure Behavior of Tested and/or Diagnosed Systems Components
Konstantin D. Dimitrov
Numerical Analysis of Crack Interaction Influence on Crack Propagation
Cristian-Sorin Neş, Nicolae Faur, Liviu Marşavina
Experimental Methods for the Analysis of Composites Materials Containing Textile
Iuliana Stamate
Analysis of Stresses to the Carcase of Water Filter
Marcu Frăţilă, Constantin Vasiloaica
Considerations Regarding the Behaviour of Cylindrical Structures
Constantin Vasiloaica, Marcu Frăţilă
Experimental Study on the Behaviour of Osteochondral Cylinders Transplanted at the Femural Condyle in the Case of an Autologous Osteochondral Transplant
Adrian Pascu*, Valentin Oleksik*, Radu Fleacă**, Mihai Roman**, Cristian Deac*, Mihaela Oleksik*
On the Multiaxial High Cycle Fatigue Damage Parameters
Ion Dumitru, Loránd Kun
The Analysis Regarding the Opportunity of Considering the Effect of Periodic Aerodynamic Loads Generated by Wind on the Durability of Aerial Transportation Pipes
Gheorghe Pintilie, Aurelian Albuţ
On the Methodology of Obtaining some Biodegradable Polymer Matrix Composite Materials
Marian Mareş, Mihai Dărângă, Camelia Mihăilescu, Cristina Racu, Liliana Buhu
The Influence of Technological Parameters on the Mechanical Properties of Some Biodegradable Polymer Matrix Composite Materials
Marian Mareş, Bogdan Leiţoiu, Mihai Dărângă, Ioan Iacob, Adrian Buhu
Simulation of Static and Dynamic Behaviour of The Wave Energy Collector in Real Sea
Mihail Pricop, Florin Gheorghe, Tiberiu Pazara
The Analysis of Ship's Hull Structure Using Vibration Measurements at Sea
Mihail Pricop, Vergil Chitac, Tiberiu Pazara, Florin Gheorghe
Response of a Rigid Polyurethane Foam in Compression Testing
Dragoş Alexandru Apostol, Dan Mihai Constantinescu
Influence of Higher Speed Loading on the Damage of a Rigid Polyurethane Foam
Dragoş Alexandru Apostol, Dan Mihai Constantinescu
Pattern Recognition Via Neural Networks for Adaptive Fault Diagnosis
Konstantin D. Dimitrov*, Inna Nacheva**
Annealing Strengthening of Electrically Deposited Metals
Ilya Kovenskiy
Experimental Determination of Compressive Properties for Rigid Polyurethane Foams
Emanoil Linul, Liviu Marşavina
Theoretical and Experimental Studies Based on Composite Materials Reinforced with E-Glass Fiber Made of Nylon or Silicone
Adrian Calienciug, Gheorghe N. Radu
Synchronous Belts Fracture Analysis Using MBS Method
Silviu Butnariu
Some Considerations Concerning Preventive Maintenance Optimization of the Bore-Hole Pumps Valves - Case Study
Adrian Cătalin Drumeanu
State Of Dynamic Stresses in Zones with Stress Concentrators in Case of High Diameter Drill Pipes
Simion Parepa
Journal INFO (ISSN 1224-8495)
Vol LXXI • No. 2/2019
Vol LXXI • No. 1/2019
Vol LXX • No. 4/2018
Vol LXX • No. 3/2018
Vol LXX • No. 2/2018
Vol LXX • No. 1/2018
Vol LXIX • No. 4/2017
Vol LXIX • No. 3/2017
Vol LXIX • No. 2/2017
Vol LXIX • No. 1/2017
Vol LXVIII • No. 4/2016
Vol LXVIII • No. 3/2016
Vol LXVIII • No. 2/2016
Vol LXVIII • No. 1/2016
Vol LXVII • No. 4/2015
Vol LXVII • No. 3/2015
Vol LXVII • No. 2/2015
Vol LXVII • No. 1/2015
Vol LXVI • No. 4/2014
Vol LXVI • No. 3/2014
Vol LXVI • No. 2/2014
Vol LXVI • No. 1/2014
Vol LXV • No. 4/2013
Vol LXV • No. 3/2013
Vol LXV • No. 2/2013
Vol LXV • No. 1/2013
Vol LXIV • No. 4/2012
Vol LXIV • No. 3/2012
Vol LXIV • No. 2/2012
Vol LXIV • No. 1/2012
Vol LXIII • No. 4/2011
Vol LXIII • No. 3/2011
Vol LXIII • No. 2/2011
Vol LXIII • No. 1/2011
Vol LXII • No. 4B/2010
Vol LXII • No. 4A/2010
Vol LXII • No. 3B/2010
Vol LXII • No. 3A/2010
Vol LXII • No. 2/2010 (Special Issue WELDING 2010)
Vol LXII • No. 1/2010
Vol LXI • No. 4/2009
Vol LXI • No. 3/2009 (Special Issue SPC 2009)
Vol LXI • No. 2/2009
Vol LXI • No. 1/2009
Vol LX • No. 4/2008
Vol LX • No. 3/2008
Vol LX • No. 2/2008
Vol LX • No. 1/2008
Vol LIX • No. 4/2007
Vol LIX • No. 3/2007
Vol LIX • No. 2/2007
Vol LIX • No. 1/2007
Vol LVIII • No. 4/2006
Vol LVIII • No. 3/2006
Vol LVIII • No. 2bis/2006
Vol LVIII • No. 2/2006
Forgot Password
  © copyright 2006 Universitatea Petrol - Gaze din Ploiesti